10
OTHER FUNCTIONS
71
■ Data cloning
The IC-R10 has receiver-to-receiver
data cloning capability. This function is
useful when you want to copy all of the
programmed contents from one
IC-R10 to another.
An optional OPC-474
CLONING CABLE
is required.
In addition, the optional CS-R10
CLONING SOFTWARE is available to
clone and edit contents using a PC.
Set cloning mode and start cloning
q Turn power OFF.
w While pushing [V/M], push
[POWER] for 1 sec. to enter
cloning mode.
e Connect an optional OPC-474 be-
tween both [SP] jacks.
r Push [FUNC] on the “master” re-
ceiver (receiver-to-receiver cloning
only).
To Next Page
Loading...
