Icom IC-R10 Instruction Manual

8
EDIT FUNCTION
53
■ Memory channel edit
1. Enter memory edit
mode
q Push [V/M] to select MEMORY
mode, then select the memory
channel (pgs. 23, 24).
w Push [EDIT] to enter memory edit
mode.
3. Set channel names
q Enter channel
names via the
keypad or by ro-
tating [DIAL].
•When you enter
channel names
from the [DIAL] or a
character assigned
in the same key,
push [ENT] before
you enter the next
character to
change the digit
(see page 72 for al-
phanumeric key as-
signment).
w Push [EDIT] to change the item.
MEMO
FM
SET CH NAME
A00 :
[DIAL]
1
2
2. Set frequency
q Enter the frequency via the key-
pad or by rotating [DIAL].
w Push [EDIT] to change the item.
MEMO
FM
SET FREQ
144.0000
[DIAL]
or
digit
keys
1
1
2
1
1
2

Icom IC-R10 Specifications

General

Brand	Icom
Model	IC-R10
Category	Receiver
Language	English