Icom MR-1010RII User Manual

31
6
AIS RECEIVER
Safety Message (Default: ON)
Sets whether the MR-1010RII displays the message
when a safety message is received.
• OFF: Turns OFF the Safety Message function.
• ON: Turns ON the Safety Message function.
Favorite AIS (Default: ON)
Sets whether the MR-1010RII noties that the
Specied MMSI target gets into the specied range
from your vessel, or not.
• OFF: Turns OFF the Favorite AIS function.
• ON: Turns ON the Favorite AIS function.
Favorite AIS Range (Default: 8.0NM)
Sets the Favorite AIS display range to between 0.1
and 36.0 NM, in 0.1 NM steps.
Favorite AIS Target1 / 2 / 3
Enters MMSI numbers of up to 3 vessels as your
favorite AIS targets.
■ Related settings
D Target menu
You can change the target settings for the AIS
operation. The settings of the Target menu are
commonly used for the ARPA and AIS operations.
See page 7 for the Target menu details.
These are the Target menu items and their default
settings.
• Vector Mode: True
• Vector Time: 6 min
• Track Interval: 1 min
• CPA* Limit: 1.0 NM
• TCPA* Limit: 1 min
• CPA/TCPA Alarm: ON
* CPA/TCPA: Closest Point of Approach and Time to
Closest Point of Approach limits are set to give a
warning when a target or targets enter those limits
around your own ship.
D System menu
You can display the AIS targets in the Standby mode.
Set the STBY Mode setting to “AIS” in the System
menu to display the AIS targets when the MR-1010RII
is in the Standby mode.
■ AIS Settings (Continued)

Icom MR-1010RII Specifications

General

Brand	Icom
Model	MR-1010RII
Category	Marine Radar
Language	English