34
7
OTHER FUNCTIONS
■ Simulation mode
The MR-1010RII has a simulation mode capability.
1. While holding down [BRILL]/[ ], push [ ] to
turn ON the power.
• After the opening screen, the standby screen is
displayed. While the MR-1010RII is in the simulation
mode, “Simulation Mode” is displayed in the upper of
the screen.
2. Push [TX (SAVE)]/[ ] to operate in the
simulation mode.
3. To return to normal operating mode, turn OFF the
power, then turn it ON again.
■ Select the language
You can select a language of the menus, messages,
indicators and so on. The selectable language differs,
depending on the version of your display unit.
1. Push [MENU]/[
] to display the Menu screen.
2. Push [t] or [u] to select the Initial menu.
3. Push [p] or [q] to select the “Language” item.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [t] or [u] to select the display language,
“English” or another.
L The selectable languages are differ, depending on
the Display unit's version.
6. Push [ENTER]/[ ] to save the setting.
7. Push [MENU]/[ ] to exit the Menu screen.
(MENU w Initial w Language)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
To Next Page
Loading...
Need help?
General
