7
32
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Receiving DSC Information
The radar can plot received DSC information from
other vessels on the screen. An external DSC data is
required to use this function.
The plottable DSC formats are:
• Distress
• Distress ACK
• Distress Relay (All Ships)
• Distress Relay ACK (All Ships)
• Distress Relay (Geographic)
• Distress Relay (Individual)
• Distress Relay ACK (Individual)
• Position ACK
• Position Report
D Receiving DSC
When DSC information is received:
• The emergency alarm sounds.
• An icon that displays the type of DSC call is plotted
on the screen.
• The readout pops up that includes the “Received
DSC,” format of the DSC, sender's MMSI, and the
nature of distress are displayed.
z Hold down [ENTER]/[ ] for 1 second to display
the detailed information, or push [CLEAR]/[ ] to
close the message box.
• Also the alarm stops.
L Push [CLEAR]/[
] to close the DSC details
message.
D DSC setting
You can select the DSC display setting in the Menu
screen.
1. Push [MENU]/[
] to display the Menu screen.
2. Push [t] or [u] to select the Display menu.
3. Push [p] or [q] to select the DSC Display item.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [t] or [u] to select an option.
6. Push [ENTER]/[ ] to save the setting.
7. Push [MENU]/[ ] to exit the Menu screen.
(MENU w Display w DSC Display)
DSC Display (Default: Symbol & Pop-up)
Sets whether the MR-1010RII displays the DSC
information or not.
• OFF: DSC information is not displayed.
• Symbol: A Symbol is displayed.
L When “Symbol” is selected, the
alarm does not sound even if a DSC
is received.
• Pop-up: DSC information pops up.
•
Symbol & Pop-up:
A symbol is displayed, and DSC
information pops up.
To Next Page
Loading...
Need help?
General
