Icom MR-1010RII User Manual

38
7
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Resetting
The MR-1010RII has two reset modes. One is
"Setting Reset" and the other is "Factory Reset."
"Setting Reset" resets all of the settings other than
the settings in the Initial menu.
"Factory Reset" resets all of the settings including the
settings in the Initial menu.
L Resetting is made on the Standby mode.
D Setting Reset
1. Push [MENU]/[ ] to display the Menu screen.
2. Push [t] or [u] to select the Initial menu.
3. Push [p] or [q] to select the “Setting Reset”
item.
L The Reset items are grayed out if the radar is in the
TX mode. Push [TX (SAVE)]/[
] in this case.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [t] or [u] to select <OK>.
6. Push [ENTER]/[ ] to reset the settings.
7. Push [MENU]/[ ] to exit the Menu screen.
D Factory Reset
1. Push [MENU]/[ ] to display the Menu screen.
2. Push [t] or [u] to select the Initial menu.
3. Push [p] or [q] to select the “Factory Reset”
item.
L The Reset items are grayed out if the radar is in the
TX mode. Push [TX (SAVE)]/[
] in this case.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [t] or [u] to select <OK>.
6. Push [ENTER]/[ ] to reset the settings.
• After resetting, the display unit automatically restarts
and displays the Initial set up screen.
7. Push [p] or [q] to select language.
L Selectable languages differ, depending on the
display unit’s version.
8. Push [ENTER]/[ ] to display the Standby
screen.
(MENU w Initial w Setting Reset)
(MENU w Initial w Factory Reset)

Icom MR-1010RII Specifications

General

Brand	Icom
Model	MR-1010RII
Category	Marine Radar
Language	English