EasyManua.ls Logo

Icom MR-1010RII - 12 Specifications; General; Display Unit; Scanner Unit (EX-2714)

Icom MR-1010RII
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
52
SPECIFICATIONS
General
• Minimum range: 25 m, 82 ft (when measurement range is
1
8 NM)
• Maximum range: 36 NM
• Measurement range:
1
8,
1
4,
1
2,
3
4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36 (NM)
• Preheat time:
90 seconds
Connection length between display and scanner unit
: 15 m, 49.2 ft
Display unit
• LCD display: 10.4-inch TFT Color LCD
• Resolution: 480 × 640
• LCD mounting: Vertical
• Input: NMEA 0183 format (for navigation receiver),
N+1 format (uxgate compass sensor),
AUX,
IEC61162-2 format (for AIS unit)
• Output: NMEA 0183 format
• Power supply requirement: 10.2 to 42 V DC
• Power consumption (at zero wind velocity): Approximately 55 W
• Usable temperature range: –15˚C to +55˚C, +5˚F to 131˚F
• Dimensions (Mounting bracket is included):
301 (W)
× 323.5 (H) × 119.2 (D) mm,
(Projections are not included) 11.8 (W) × 12.7 (H) × 4.7 (D) inches
• Weight (Mounting bracket is included): Approximately 4.3 kg, 9.5 lb
Scanner unit (EX-2714)
• Type: 60 cm (2 ft.)
Slotted Waveguide Array, enclosed in a radome.
• Rotation speed (typical): 24 rpm, 36 rpm
• Beam width (typical): Horizontal beam
Vertical beam 22˚
• Side lobe (typical): –22 dB
• Polarization: Horizontal
• Transmission frequency: 9410 MHz ±30 MHz P0N
• Peak output power: 4 kW
• Pulse width:
80 ns / 2160 Hz, 80 ns / 1440 Hz, 250 ns / 1440 Hz, 350 ns
/
1440 Hz, 350 ns / 720 Hz, 900 ns / 720 Hz
• Mixer and Local Oscillator: Microwave Integrated Circuit
• Transmitting Tube: Magnetron MAF1421B
• Modulator: FET switching
• Duplexer: Circulator
• Tuning system: Automatic / manual selectable
• Intermediate frequency: 60 MHz
• IF Band width: 10 MHz, 3 MHz
• Dimensions:
640 (W)
× 256 (H) × 640 (D) mm,
25.2 (W) × 10.1 (H) × 25.2 (D) inches
• Usable temperature range: –25˚C to +70˚C, –13˚F to 158˚F
• Relative Humidity: Less than 95% at 40˚C (+104˚F)
• Weight: Approximately 8 kg, 17.5 lb (without cable)
Options
OPC-2339 system cable
Allows you to install the display unit and scanner up to 20 m (65.6 ft) apart.
OPC-2340 system cable
Allows you to install the display unit and scanner up to 30 m (98.4 ft) apart.
UX-252 video output unit
Allows you to connect an external display or a PC monitor with a VGA connector.
All stated specications are subject to change without notice or obligation.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Table of Contents

Other manuals for Icom MR-1010RII

Related product manuals