IDEC FT1A Series User Manual

6: HMI F UNCTION
6-26 S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378
Format SD memory card with the SmartAXIS
This section describes how to format the SD memory card in the SmartAXIS. In order to save the log data, format the SD memory
card in the SmartAXIS.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select External Memory with the (up) and (down) buttons and press the (OK) button.
3. Select SD Card with the (up) and (down) buttons and press the (OK) button.
4. Select Format with the (up) and (down) buttons and press the (OK) button.
5. Select Yes with the (down) button and press the (OK) button.
6. While the SD memory card is being formatted, the screen below is displayed. When the format is finished, the screen in step 4
is displayed.
Stopped
2012/OCT/10/WED
13:30:40
Run
Edit Program
External Memory
Configurations
Memory Cartridge
SD Card
Stop Access
Format
Do you want to
format SD card?
No
Yes

IDEC FT1A Series Specifications

General

Brand	IDEC
Model	FT1A Series
Category	Controller
Language	English