IDEC FT1A Series User Manual

S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378 13-21
13: S CRIPTS
2. Relational Operators
Example 2.1 Equal to
Script
Operation Description
If the value of D0100 is equal to the value of D0102, then 0x100 is stored in D0103.
Example 2.2 Not equal to
Script
Operation Description
If the value of D0100 is not equal to the value of D0102, then 0x100 is stored in D0103.
Example 2.3 Less than
Script
Operation Description
If the value of D0100 is less than the value of D0102, then 0x100 is stored in D0103.
Example 2.4 Less than or equal to
Script
Operation Description
If the value of D0100 is less than or equal to the value of D0102, then 0x100 is stored in D0103.
Example 2.5 Greater than
Script
Operation Description
If the value of D0100 is greater than the value of D0102, then 0x100 is stored in D0103.
Example 2.6 Greater than or equal to
Script
Operation Description
If the value of D0100 is greater than or equal to the value of D0102, then 0x100 is stored in D0103.
if ([D0100] == [D0102])
{
[D0103] = 0x100;
}
if ([D0100] != [D0102])
{
[D0103] = 0x100;
}
if ([D0100] < [D0102])
{
[D0103] = 0xl00;
}
if ([D0100] <= [D0102])
{
[D0103] = 0xl00;
}
if ([D0100] > [D0102])
{
[D0103] = 0xl00;
}
if ([D0100] >= [D0102])
{
[D0103] = 0xl00;
}

IDEC FT1A Series Specifications

General

Programming Software	WindLDR
Type	Programmable Logic Controller (PLC)
Display	LCD (varies by model)
Communication Ports	RS232C/RS485 (built-in), USB (programming), Ethernet (optional)
Dimensions	Varies by model
Weight	Varies by model
Model	FT1A Series