IDEC FT1A Series User Manual

13: S CRIPTS
13-28 S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378
Example 7.10 Tangent
Script
Operation Description
Calculates the tangent of the radian value of D0020 and stores the result in D0010.
Only the data type F (float) can be used.
Example 7.11 Arcsine
Script
Operation Description
Calculates the arcsine of the value of D0020 and stores the result as radians in D0010.
Only the data type F (float) can be used.
Example 7.12 Arccosine
Script
Operation Description
Calculates the arccosine of the value of D0020 and stores the result as radians in D0010.
Only the data type F (float) can be used.
Example 7.13 Arctangent
Script
Operation Description
Calculates the arctangent of the value of D0020 and stores the result as radians in D0010.
Only the data type F (float) can be used.
Example 7.14 Convert angle to radians
Script
Operation Description
Converts the value of D0020 from degrees (°) to radians and stores the result in D0010.
Only the data type F (float) can be used.
Example 7.15 Convert radians to angle
Script
Operation Description
Converts the value of D0020 from radians to degrees (°) and stores the result in D0010.
Only the data type F (float) can be used.
[D0010] = TAN([D0020]);
[D0010] = ASIN([D0020]);
[D0010] = ACOS([D0020]);
[D0010] = ATAN([D0020]);
[D0010] = RAD([D0020]);
[D0010] = DEG([D0020]);

IDEC FT1A Series Specifications

General

Programming Software	WindLDR
Type	Programmable Logic Controller (PLC)
Display	LCD (varies by model)
Communication Ports	RS232C/RS485 (built-in), USB (programming), Ethernet (optional)
Dimensions	Varies by model
Weight	Varies by model
Model	FT1A Series