IDEC FT1A Series - Page 380

A PPENDIX
A-14 S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378
Monitoring the SmartAXIS Status
Checking/clearing error information
Device Monitor
Program Monitor
Status Monitor
Error Status
System Version:
1.00
Run/Stop Status:
Running
When the SmartAXIS is stopped: Stopped
Scan Time:
Current: 2 ms
Maximum: 4 ms
Minimum: 2 ms
Protection Status:
Read Program:
Prohibited
Protection Status:
Write Program:
Password Protected
MAC Address:
**-**-**-**-**-**
Subnet Mask:
255.255.255. 0
Default Gateway:
0. 0. 0. 0
Network Settings
DHCP: OFF
IP Address:
192.168. 1. 5
General Error: 3
Execution Error: 0
Clear Error
Device Monitor
Program Monitor
Status Monitor
Error Status
Error!
PLC is stopped.
Press OK button for
more details.
Error!
PLC is running.
Press OK button for
more details.
General Error: 3
Execution Error: 0
Clear Error
General Error: 3
Power failure
Watchdog Timer
(Press and hold)