IKONIX apt 400XAC Series - Page 114

108
TDC-P?
Testing power meter
See Note3-1
W
TDC-PF?
Testing pf meter
0.000~1.000
TDC-Q?
Testing Q meter
See Note3-1
TDC-CF?
Testing CF meter
0.00~10.00
TDC-VA?
Testing VA meter
See Note3-1
VAR
TDE-VOLT?
Testing voltage meter
0.0~300.0
V
TDE-CURR?
Testing current meter
See Note1-1
A
TDE-P?
Testing power meter
See Note3-1
W
TDE-PF?
Testing pf meter
0.000~1.000
TDE-Q?
Testing Q meter
See Note3-1
TDE-VA?
Testing VA meter
See Note3-1
VAR
TDA?
Read the selected Phase A meter values while a test is in process. Query only
available in AC Program mode and AC Manual mode.
TDB?
Read the selected Phase B meter values while a test is in process. Query only
available in AC Program mode and AC Manual mode.
TDC?
Read the selected Phase C meter values while a test is in process. Query only
available in AC Program mode and AC Manual mode.
TDE?
Read the total (Phase A + B + C) meter values while a test is in process. Query
only available in AC Program mode and AC Manual mode.
RDA XX?
Read the selected Phase A results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDB XX?
Read the selected Phase B results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDC XX?
Read the selected Phase C results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDE XX?
Read the selected total (Phase A + B + C) results once a test has completed.