EasyManuals Logo

IKONIX apt 400XAC Series User Manual

IKONIX apt 400XAC Series
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
26
Resolution
0.1V
Accuracy
±(0.2% of setting + 3counts)
Current
Range
0.05A~19.50A
0.05A~39.00A
Resolution
0.01A
Accuracy
± (1% of reading +5counts)
Power
Range
0W~3900W
0W~7800W
Resolution
1W
Accuracy
± (2% of reading +5counts)
Protection
Software OCP
Over Current 110% of full rated current >1 second
Output Short Shut Down Speed (*7)
<1 second
Software OPP
When over Power 105 ~ 110% of full power >5 second.
When over Power >110% of full power <1 second.
Software OTP
Temperature over 95°C on the power amp
and PFC heatsink
Temperature over 120°C on the power amp
and PFC heatsink
Software OVP
L
When output frequency <100Hz, maximum voltage deviation +5V
When output frequency 101-500Hz, maximum voltage deviation +15V
When output frequency 501-1000Hz, maximum voltage deviation +20V
H
When output frequency <100Hz, maximum voltage deviation +10V
When output frequency 101-500Hz, maximum voltage deviation +30V
When output frequency 501-1000Hz, maximum voltage deviation +40V
Software LVP
L
When output frequency <100Hz, maximum voltage deviation -5V>0.5 second
When output frequency 101-500Hz, maximum voltage deviation -15>0.5 second
When output frequency 501-1000Hz, maximum voltage deviation -20V>0.5 second
H
When output frequency <100Hz, maximum voltage deviation -10V >0.5 second
When output frequency 101-500Hz, maximum voltage deviation -30V >0.5 second
When output frequency 501-1000Hz, maximum voltage deviation -40V >0.5 second
Reverse Current Protect
Over 75W of full power
GENERAL
Safety Agency Listing
CE, cTUVus, RoHS2
Transient (only for 40~70Hz) (*11)
Trans-Volt 0.0-300.0V Resolution 0.1V
Trans-Site 0~359 Resolution 1
Trans-Time 0.5-999.9mS Resolution 0.1mS
Trans-Cycle 0-9999, 0-Constant
Operation Key Feature
Soft key, Numeric key, Rotary Knob.
Remote Input Signal
Test, Reset, Interlock(*12),Recall program memory 1 through 7
Remote Output Signal
Pass, Fail , Test-in Process
Key Lock
Yes, Password Driven
Memory
50 memories, 9 steps/memory
Ext Trigger
START / END / BOTH / OFF in the Program mode, Output Signal 5V ,BNC type

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKONIX apt 400XAC Series and is the answer not in the manual?

IKONIX apt 400XAC Series Specifications

General IconGeneral
BrandIKONIX
Modelapt 400XAC Series
CategoryAC Power Distribution
LanguageEnglish