EasyManua.ls Logo

illy IPERESPRESSO Y2 - TECHNICAL SPECIFICATIONS; WARRANTY LIMITATIONS

illy IPERESPRESSO Y2
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
IT
EN
CARATTERISTICHE TECNICHE
Materiali Carrozzeria : Acciaio Inox, alluminio, ABS e PC
2 termoblocchi indipendenti per gruppi ca è
2 pompe da 15 bar per il ca è e 1 da 7 bar per il vapore
Boiler da 3 litri per produzione acqua calda e vapore
Controllo erogazione ca è a volume
Voltaggio: 230 V - 50 / 60 Hz ; 120 V - 60 Hz
Potenza massima installata : 2800 W
Peso: 32 Kg
Dimensioni (mm) : larghezza 565 ; altezza 480 ; profondità 510
Serbatoio acqua : 4 litri
Vaschetta raccolta capsule usate: 50 capsulea
Cassetto scaldatazze: max 36 tazze espresso
Potenza scaldatazze : 200W
Controllo elettronico della temperatura ca è, acqua calda e vapore
Diagnostica decalci cazione e guasti
Trasmissione diagnostica dati via WiFi per assistenza remota
Riconoscimento automatico presenza capsula
Display: Touch Screen da 4.3”
Fino a 4 volumi in tazza programmabili (2 x gruppo ca è)
Processo di decalci cazione automatico e guidato
Rumorosità massima inferiore a 70db
LIMITAZIONI SULLA GARANZIA
La garanzia non copre:
1. danni causati da mancata decalci cazione o da mancata manutenzione ordinaria come
prescritto nel presente manuale
2. danni derivanti da uso improprio o installazione non conforme alle prescrizioni del produt-
tore contenute nel presente manuale
3. difetti di carrozzeria od estetici derivanti dall’uso della macchina (gra , ammaccature,
ecc.)
4. danni dovuti a trasporti e ettuati con imballo non originale
5. difetti relativi alla bevanda non derivanti direttamente dal funzionamento della macchina.
La garanzia decade:
1. in caso di utilizzo di ricambi non originali
2. in caso di interventi di tecnici o centri di assistenza non autorizzati dal produttore.
TECHNICAL SPECIFICATIONS
Body Material: SS, aluminium, ABS and PC
2 independent thermobloc for cbrew groups
2 15-bar pumps for co ee and 1 7-bar pump for steam
3 litre boiler to make hot water and steam
Co ee brewing volume control
Voltage: 230 V - 50 / 60 Hz ; 120 V - 60 Hz
Maximum power installed : 2,800 W
Weight: 32 kg - 1,128.77 oz.
Size (W x D x H): 565 x 510 x 480 (mm) - 22.24 x 20.08 x 18.90 (in)
Water tank : 4 litres - 135.26  oz
Used capsule tray: 50 capsules
Cup warmer tray : max 36 espresso cups
Cup warmer power : 200 W
Electronic temperature control for co ee, hot water and steam
Troubleshooting descaling and malfunctions
Transmission of diagnostic data via WiFi for remote assistance
Automatic capsule detection
Display: 4.3” Touch Screen
Up to 4 programmable cup volumes (2 x brew group)
Automatic and guided descaling process
Maximum noise level lower than 70db
WARRANTY LIMITATIONS
The warranty does not cover:
1. damage caused by the failure to descale or failure to perform the scheduled maintenance as
instructed in this manual
2. damage from misuse or installation that is not compliant with the manufacturers instructions
in this manual
3. body or aesthetic defects from use of the machine (scratches, dents, etc.)
4. damage from shipping carried out with non-original packaging
5. beverage defects not directly caused by the machine operation.
The warranty is void:
1. in the event non-original spare parts are used
2. in the event of interventions by technicians or service centres not authorised by the manufac-
turer.

Table of Contents

Related product manuals