Setup and Assembly Manual Page 7
Table of Content, part 2
B Software Setup --------------------------------------------------------------- 28
B.1 Start Screen of the Scan2Net User Interface ...................................................... 28
B.2 Setup Menu ........................................................................................................ 29
B.2.1 Selecting the Login Level 29
B.3 Poweruser Login Level ....................................................................................... 30
B.3.1 Setting the Network Parameters 31
B.3.1.1 IP Configuration Method 32
B.3.1.2 IPv4 (Network Interface 0) 32
B.3.1.3 Domain Name Server 33
B.3.1.4 SMB Settings 33
B.3.2 Adjust Time & Date 34
B.3.3 Sound System 35
B.3.3.1 Set Volume 36
B.3.3.2 Sound Files 37
B.3.3.3 Link Events 38
B.3.4 Firmware Update 39
B.3.5 Install ICC Profiles 41
B.3.5.1 Scanner Profile 42
B.3.5.2 Printer Profiles 43
B.3.6 Install Option 45
B.3.7 White Balance 46
B.3.8 Brightness Correction 47
C Maintenance, Tests and Troubleshooting --------------------------- 48
C.1 Separating Device Cover from Device Body ....................................................... 48
C.2 Assembling the Device Cover to the Device Body .............................................. 52
C.2.1 Assembling the Glass Plate Cover 53
C.3 Cleaning the WideTEK 25 Scanner .................................................................... 54
C.3.1 Cleaning the Outside of the Glass Plate 54
C.3.2 Cleaning the Inside of the Glass Plate 54
C.4 Scan Test Targets .............................................................................................. 55
C.4.1 Scan CSTT Test Target 55
C.4.2 Scan IT8 Test Target 56
C.5 Network Analyzer ............................................................................................... 57
To Next Page
Loading...
Need help?
General
