NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
121
10. Apply sample and press the sample button to initiate the measurement.
If auto sample is active the sample measurement is automatically started
after closing the lid arm.
Note: Auto sample function is only available NanoVolume methods and
new NanoPhotometer
®
versions it may not be available after updating an
older firmware version.
Note: Once the sample measurement is initiated it is not possible to
make changes to the standard curve.
CALCULATIONS
Concentration is determined via the absorbance values provided by the standard curve
based on the curve fit selection including the following options: linear regression, zero
regression and 2
nd
order regression.
CUSTOM APPS
There is an option for designing customer specific Custom Apps which can be loaded to the
NanoPhotometer
®
. For more information about designing custom applications to suit
individual research needs please contact Implen directly for assistance.
To Next Page
Loading...
Need help?
General
