NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
128
WARNING MESSAGES
BLANK CONTROL
Toggle switch to switch on/off the Blank Control™ of the NanoPhotometer
®
.
Note: Blank Control™ is available for all NanoVolume methods (for N120/NP80/N60/N50).
SAMPLE QUALITY CONTROL
It is possible to change the upper and the lower limit of the ratio alert warning messages.
Default values for nucleic acid ratios are:
260/230 ratio 1.8 A - 3 A and 260/280 ratio 1.65 A - 2.5 A.
Default value for Protein UV ratio is:
260/280 ratio is 0.7 A.
To Next Page
Loading...
