NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
124
5. PREFERENCES
System preferences can be set by selecting preferences on the home screen. The
preferences menu includes: General, Dyes, Warning Messages, Network, Printer and
CFR21. The preference options of the selected menu item are listed in the window on the
right.
Note: Preferences are not available on smartphones with screen sizes less than 7 inches.
GENERAL
Selecting General in the Preferences menu opens a window to the right of the preferences
menu with the following options: Date and Time, Display, About, Storage, Language and
Illumination Sample Window (N120/NP80/N60/N50) or Enable NanoVolume (C40).
DATE AND TIME
Within the Date and Time it is possible to set the actual date and time of the
NanoPhotometer
®
or change the time zone.
To change the time zone or the date and/or time, push on the appropriate field to open the
selection options. The changed settings are shown below the time zone field. To apply the
changes, the NanoPhotometer
®
must be rebooted. Start the reboot by pushing on the Set
and Reboot button.
To Next Page
Loading...
Need help?
General
