NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
129
NETWORK
Selecting Network in the Preferences menu opens a window to the right of the preferences
menu with the following options: Network Settings, WLAN Settings, File Server Access and
Network Folder.
NETWORK SETTINGS
In Network Settings it is possible to choose between a Dynamic Host Configuration Protocol
(DHCP) and a static network configuration. The DHCP protocol is used by default. Connect
the NanoPhotometer
®
with the Ethernet and the IP is automatically set during the startup of
the NanoPhotometer
®
. If no IP Address is listed for Current IPv4, push the disk icon ( ) to
search for an available IP address.
To Next Page
Loading...
