NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
18
Field Kit
Implen aluminum roller case for safe transportation, designed to fit in most airplane
overhead bins; special compartments for all necessary accessories, cleaning tools and
samples.
Note: Delivered w/o NanoPhotometer
®
and accessories
Note: Operate the NanoPhotometer
®
in the roller case only when cover is open. Ensure that
air circulation is possible. Always switch NanoPhotometer
®
off for transportation.
Barcode Reader
It is possible to import sample names from 1D and 2D barcodes. Connect a compatible
barcode reader to the USB port of the NanoPhotometer
®
and push on the sample name
input window. After scanning a barcode the sample name will be shown in the input window.
The imported name can then be edited or replaced completely.
Barcode readers that have been tested and verified compatible:
1D: Honeywell Voyager 95X0 Single-Line Laser Scanner
Datalogic Touch65
1D & 2D: AGPtEK SC36
Honeywell Xenon 1900g
DYMO Label Printer
It is possible to connect a DYMO Label printer to the NanoPhotometer
®
for direct printing on
standard or cryo labels. Recommended and tested printers are the DYMO LabelWriter 4XL
(label size 10.3 x 15.8 cm) and the DYMO LabelWriter 450 (5.4 x 10 cm). Cryo labels can be
printed with both DYMO printers using the following label format: 26 x 12.7 mm and 9.5 mm
circle (landscape).
Note: After starting the NanoPhotometer
®
, plug in the DYMO printer. The home screen will
be shown. Wait at least for 30 seconds for driver installation.
Cryo labels (26 x 12.7 mm and 9.5 mm circle):
Note: Orientation of cryo labels on carrier foil needs to be landscape.
To Next Page
Loading...
Need help?
General
