Implen OD600
®
User Manual Version 1.0
12
The instrument must be placed on a stable, level surface that can support 0.6 kg and so that air can circulate freely around
the instrument. Ensure while powered on that no materials reduce air circulation.
The equipment should be positioned such that in the event of an emergency the main plug can be easily located and
removed.
Carry the instrument always by holding the main corpus of the instrument.
The equipment must be connected to power with the USB-C charger – output: 20W max., input: AC 100-240V, 50/60Hz,
0.5A. The power supply/cord supplied by Implen is a USB-C adapter with 5V. Please charge the battery for at least for 3
hours prior to the first use.
Turn the instrument on using the power button on the touch-panel after it has been plugged in. The instrument will perform
a series of self-diagnostic checks.
Please read the complete user manual prior to use.
Please contact original supplier immediately if technical or sample handling difficulties are experienced.
Note: If this equipment is used in a manner not specified or in environmental condition not suitable for safe operation, the
protection provided by the equipment may be impaired and the instrument warranty voided.
To Next Page
Loading...
