Implen OD600 - Instrument Bottom View; Accessories; Standard Accessories; Optional Accessories

Implen OD600
®
User Manual Version 1.0
8
Instrument Bottom View
Model name, device serial number and FCC ID are located on the identification plate on the bottom of the instrument.
Accessories
Standard Accessories
 Charging Cable with Adapter
The USB-C cable provided makes it possible charge the Implen OD600
®
in a normal power outlet. Use the power adapter
to plug in the device for use and/or to charge the battery.
Note: Use only the power adapter, supplied with your instrument or a replacement part from the manufacturer or your supplier.
Optional Accessories
 Neutral Density Glass Filter
The Implen OD600
®
is recalibration free therefore it is not necessary to control the photometric accuracy on a regular basis.
If the SOPs of a laboratory require a routinely control of the photometric accuracy, a certified neutral density glass filter can
be used as a control of wavelength and photometric accuracy for your OD600
®
applications.
 DiluCell
TM
Description
The DiluCell™ is a disposable cuvette with shortened path length for virtual dilution of cuvette-based samples. Due to the
reduced path length the DiluCell™ provides an automatic dilution without the need of a physical dilution of higher
concentration samples.
The DiluCell™ DC 10 allows an automatic 1/10 dilution of the sample. Bypassing manual sample dilutions reduces dilution
errors and cross-contamination making DiluCell™ ideal for GLP. Combined with small sample volume requirements and
bubble free filling, the DiluCell™ allows for convenient spectrophotometric analysis from 340 - 950 nm.
Operatin instructions can be found in the manual under “DiluCell™ technology”.
The DiluCell™ DC 10 can be ordered at Implen under the artikle number: DC-10.