Implen OD600 - System Freeze

Implen OD600
®
User Manual Version 1.0
40
memory clear final message
Are you certain you want to delete all measurement data? All stored
results will be removed from the device.
memory clear primary message
Are you sure you want to clear OD600 device memory? All sample
and measurement data will be removed from the device.
memory status full message
Storage space full. No further measurements possible. Move data to
an external storage and delete onboard results to free up space.
memory status low message
Low storage alert: Device performance may be affected. Move data to
an external storage and delete onboard results to free up space.'
memory write failure message
Failed to write the data to the memory
poweroff message
Do you want to shut down your OD600.
power button fault message
Power touch timeout error. - [number]
sample delete set message
Are you sure you want to delete all the selected sets?
sample export message
Are you sure you want to export all the selected measurements?
sample export set message
Please select the desired format for data export
set delete message
Are you sure you want to delete all the selected measurements?
time date set message
Please set the time and date
tube no_calibration message
No calibration data available. Start new calibration?
tube previous_calibrate
message
Previous calibration date: [timestamp]
usb create logfile inprogress
message
Please do not remove the USB device while the log file is getting
created.
usb data backup inprogress
message
Please do not remove the USB device while the data backup is in
progress.
System Freeze
In case of significant Electrostatic Discharge (ESD) impulses it could happen that the device briefly shuts down and
switches on again. The system will recover in the main home screen. However, if there is no reaction, please press
the touch power key at the cover glass of the display and restart the system.