EasyManua.ls Logo

Implen OD600 - Declaration of Conformity

Implen OD600
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Declaration of Conformity
1. Product model / product:
Product
Implen OD600
®
2. Manufacturer / Authorized Representive:
Name
Implen GmbH
Address
Schatzbogen 52, D-81829 Munich, Germany
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration:
Product
Implen OD600
®
5. The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
2014/35/EU
Low Voltage Directive
2014/53/EU
Radio Equipment Directive
2014/30/EU
The Electromagnetic Compatibility Directive
2011/65/EU
The Restriction of Hazardous Substances Directive
FCC 47 CFR Part15 §15.107 and §15.109
6. References to the relevant harmonized standards used or references to the other technical specifications in relation
to which conformity is declared:
Reference & Date
Title
ETSI EN 301 489-1 V2.2.3
Radio and ancillary equipment for portable use (portable equipment);
EUT Operating frequency range: 2.4 - 2.4835 GHz
ETSI EN 300 328 V2.2.2
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques; Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 301 489-17 V3.2.4
Electromagnetic compatibility and Radio Spectrum Matters (ERM)
UN38.3, 2013/56/EU
Battery certification and transport test
IEC 61010-1:2010
Safety requirements for electrical equipment for measurement, control, and
laboratory use. General requirements.
EN IEC 61326-1:2021
Electromagnetic compatibility- generic emission standard electrical equipment
for measurement, control and laboratory use.
IEC 60529:1989/AMD2:2013
Degrees of protection prohibited by enclosures (IP 20)
7. Additional information:
The technical documentation for the machinery is available from:
Name:
Implen GmbH
Address:
Schatzbogen 52, D-81829 Munich, Germany
Signed for and behalf of:
Implen GmbH
Place of issue:
Munich, Germany
Date of issue:
19.08.2024
Name:
Martin Sahiri
Function:
Managing Director
Signature:

Table of Contents

Related product manuals