EasyManua.ls Logo

IMPRESSA F8 - Initial Setup and First-Time Operation; Bean Container Filling and Initial Setup

IMPRESSA F8
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
U
Place the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
U
Choose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Blue fil-
ter cartridge. If the water hardness is 10 °dH or more, we recommend
using the filter cartridge. If you do not know the hardness of your
water, you can find this out first (see Chapter 1 ‘Preparing and using
for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
First-time use
J
WARNING

Table of Contents

Related product manuals