24
3 Daily operation
T Dismantle and rinse the fine foam frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the fine foam
frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E In the interests of hygiene, we recommend changing the milk
pipe on a regular basis (approx. every 3 months). Replacement
pipes are available from specialised dealers.
When the IMPRESSA is switched off, the system is automatically
rinsed if a speciality coffee has been prepared. If milk has been pre-
pared, the machine will also prompt you to rinse the cappuccino
frother.
Precondition:
‘Please select product’ is displayed.
T Place a receptacle under the fine foam frother and under the
coffee spout.
Q T Press the On/Off button.
‘Switch open’ (if you have prepared milk)
l T Turn the switch to them position.
‘Milk system is being rinsed’, the fine foam frother is rinsed.
‘Switch close’
l T Turn the switch to the °position.
‘Machine is rinsing’, the system is rinsed. The operation
stops automatically. Your IMPRESSA is switched off.
E When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.1W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.
Switching off
To Next Page
Loading...
