IMPRESSA F8 - Renaming Products

28
4 Permanent settings in programming mode
T Press the ‘Expert mode’ button.
‘Expert mode’
T Press the ‘ > ’ button (bottom right) several times until
‘Macchiato’ is displayed.
T Press the
‘Macchiato’ button.
‘Macchiato’
 g T Press the ‘>’ button (bottom right) until ‘Add to favourites’
is displayed.
T Press the
‘Add to favourites’ button.
‘Select position’
T Press the ‘Cappuccino’ button.
‘Select position’ / ‘Do you want to replace the current pro-
duct?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Macchiato’
 O T Press the P button to exit programming mode.
‘Please select product’
In the programme item ‘Product settings’/‘Expert mode’ you can
rename all of the products.
Precondition:
‘Please select product’ is displayed.
 O T Press the P button.
‘Maintenance status’ (‘1/7’)
 g T Turn the Rotary Switch until
‘Product settings’ (‘3/7’) is dis-
played.
T Press the
‘Expert mode’ button.
‘Expert mode’
T Press the ‘>’ button (bottom right) until ‘Espresso’ is dis-
played.
T Press the
‘Espresso’ button.
‘Espresso’
T Press the ‘>’ button (bottom right) until ‘Product name’ is
displayed.
T Press the
‘Product name’ button.
The available letters, numbers and special characters appear
on the display.
Renaming a product