IMPRESSA F8 - Understanding Display Messages; Display Message Actions

45
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water
tank.’
The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 1 ‘Prepar-
ing and using for the first time – Filling the
water tank’).
‘Empty
grounds’
The coffee grounds container
is full. You cannot prepare any
products.
T Empty the coffee grounds container and
the drip tray (see Chapter 3 ‘Daily opera-
tion – Daily maintenance’).
‘Drip tray not
fitted’
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
T Fit the drip tray.
‘Fill bean
container’
The bean container is empty.
You cannot prepare any products.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
‘Rinse the
milk system’
The IMPRESSA requests a
cappuccino rinse.
T Perform milk system rinsing (see Chap-
ter 5 ‘Maintenance – Rinsing the fine foam
frother’).
‘Change the
filter’
The filter cartridge no longer
works.
T Replace the CLARIS Blue filter cartridge
(see Chapter 5 ‘Maintenance – Changing
the filter’).
‘Clean
machine’
The IMPRESSA is prompting you
to clean it.
T Perform cleaning (see Chapter 5 ‘Mainte-
nance – Cleaning the machine’).
‘Decalcify
machine’
The IMPRESSA is prompting you
to descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).
‘Not enough
ground coffee’
There is insufficient ground coffee
in the machine; the IMPRESSA
stops the operation.
T The next time you prepare a beverage,
add more ground coffee (see Chapter 2
‘Preparation – Ground coffee’).
‘Too hot’ The system is too hot to start a
maintenance programme.
T Wait for several minutes until the system
has cooled or prepare a speciality coffee or
hot water.