15
2 Preparation
2 Preparation
E You can stop the machine at any time while a speciality coffee,
steam or hot water is being prepared. Just press any button
(for a speciality coffee) or return the switch to its original posi-
tion (for steam and hot water).
E During the grinding operation you can select the coffee
strength of single products by turning the Rotary Switch g:
mild (;), normal (;;), strong (;;;), extra strong (;;;;).
E During preparation, you can change the preset amount of
water or steam by turning the Rotary Switch g.
E You can follow the current status of preparation on the display.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
The IMPRESSA offers various ways of preparing a speciality coffee,
milk foam or hot water:
U
Preparation using the start screen: Simply press the corre-
sponding preparation button for the product shown on the
display (start screen) that you want.
The following products are displayed as standard on the start
screen:
U
‘Espresso’
U
‘Coffee’
U
‘Cappuccino’
U
‘Latte macchiato’
U
Using the product selector view (Rotary Selection): Only
some of the products you can prepare are shown on the start
screen. As soon as you turn the Rotary Switch, more products
are displayed in a product selector view.
Ways of preparing a
beverage
To Next Page
Loading...
