34
4 Permanent settings in programming mode
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display
‘Geräteeinstellungen’
O T Press the P button to exit programming mode.
‘Bitte wählen’
In the programme item ‘Information’ (‘7/7’) you can view the follow-
ing information:
U
‘Product counter’: Number of prepared coffee speciality cof-
fees, speciality coffees with milk and hot water
U
‘Maintenance counter’: Number of maintenance programmes
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Example:Proceed as follows to view the number of speciality cof-
fees prepared.
Precondition:
‘Please select product’ is displayed.
O T Press the P button.
‘Maintenance status’ (‘1/7’)
g T Turn the Rotary Switch until
‘Information’ (‘7/7’) is displayed.
T Press the
‘Product counter’ button.
‘Product counter’
E Press the ‘>’ button (bottom right) to display the number of
additional speciality coffees.
O T Press the P button to exit programming mode.
‘Please select product’
Querying information
To Next Page
Loading...
