Compliance Via Sensors Setup Page 22 - 1
22
Contents:
CVS Menu
Before Programming
CVS Tanks Menu
CVS Lines Menu
See the Table of Contents to find topics in
this manual. See the Preface for general
information about this manual. And see the
Installation, Operator’s, TroubleShooting
Guides, and Application Notes for other
reference material.
Press the
DOWN
▼ key until CVS is displayed - alignment with
menu keys depends on the programming of other features.
SETUP MENU (MORE)
EXIT SYSTEM TANKS PROBES
SELECT MENU OPTION (MORE)
SETUP
UPGRADE LANGUAGE DATALOG
M1 M2 M3 M4
CVS Menu
Before Programming:
• Have the power switched ON at the Tank Sen-
tinel Console and at the power panel.
• Reference the INCON CVS Manual (INCON PN:
000-1095) for details about this feature.
• From the SETUP>SYSTEM menu – program
the units of measure, correct number of tanks,
and correct number of leak detection sensors.
Also, program the: sentinel mode limits, deliv-
ery delay, report delivery and alarm, and the
max size of the historical records that will used
in reports.
Character input / editing:
• Push
UP/DOWN
keys ▲
▼ to show more
menus or menu selections.
• Use menu keys
(M1
to
M4)
to access
menus.
• Press
ENTER
to accept a selection or input a
value into the setup configuration memory.
• Press
CANCEL
to cancel data entry
• Press
M1
to move the cursor left ï
• Use
M2
to move the cursor right ð
• Press
M4
to backspace (delete) one charac-
ter to the left
ï
CVS TANKS
TANK 1 Press the
M1
key.
— CONTINUED ON NEXT PAG E —
22 Compliance Via Sensors (CVS)
SETUP PROGRAMMING
H U
MENU
× Press this key and follow the
7
highlighted sequence below
COMPLIANCE VIA SENSORS
TANKS LINES
M1 M2 M3 M4
SETUP MENU (MORE)
CPM COM PORTS
CVS
M1 M2 M3 M4
To Next Page
Loading...
Need help?
General
