23
Page 23 - 10 Tank Sentinel Setup Programming Guide
— TPI Group continued —
MODE (user entry)
Here is the MODE GROUP 2 user entry field
display.
NONE
is the default setting ....
Use the
UP
/
DOWN
▲ ▼ keys to change the
default mode and scroll through the other
modes - LEVELING and PRIORITY ....
Press the
ENTER
key to accept data entry.
This entry returns the display to the GROUP
N menu.
If PRIORITY is selected,
Proceed to the RESERVE
menu, which is described
next ....
RESERVE (user entry)
Here is the GROUP 2 main menu, displaying
TYPE, MODE and RESERVE ....
Press the
M3
key to display the RESERVE
menu ....
The RESERVE user entry field displays the
“percent full” value for GROUP 2 (in Priority
mode). The default setting is 20.
Press the
M4
key to backspace and erase
the default percent value. This will clear the
field.
— continued on the next page —
MODE GROUP 2 (UP/DN)
PRIORITY
M1 M2 M3 M4
RESERVE PERCENT GROUP 2 NUMERIC
20 BACKSPACE
M1 M2 M3 M4
To Next Page
Loading...
Need help?
General
