Industrial Indexing Systems MSC-250 User Manual

IB-11B012
MOTION CONTROL SYSTEMS, MSC-250 AUGUST 1998
MSC-250
2½-AXIS
SERVO
CONTROLLER
USER’S GUIDE
INDUSTRIAL INDEXING SYSTEMS, Inc.
Revision - C
A
pproved By:
Proprietary information of Industrial Indexing Systems, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
Industrial Indexing Systems, Inc.

Industrial Indexing Systems MSC-250 Specifications

General

Brand	Industrial Indexing Systems
Model	MSC-250
Category	Controller
Language	English

Summary

INTRODUCTION

SECTION 1 - DESCRIPTION

1.1 Indexing Drive System Overview

Overview of the components in a basic indexing drive system.

1.2 System Functions

Details the capabilities and functions of the MSC-250 controller.

1.3 Components

Describes the connectors and status indicators on the MSC-250.

1.4 Specifications

Outlines the physical and performance characteristics of the MSC-250.

SECTION 2 - INSTALLATION

2.1 Mounting

Instructions for physically mounting the MSC-250 controller.

2.2 Electrical Connections

Guidelines for connecting power and grounding the MSC-250.

SECTION 3 - OPERATION

3.1 Control Program

Information on creating and loading Macroprograms for the controller.

3.2 Controller Use and Status

How to use the controller and interpret status displays.

SECTION 4 - MAINTENANCE

4.1 Component Replacement

Procedures for replacing components like battery and firmware.

4.2 Troubleshooting

Steps to identify and correct controller malfunctions.

SECTION 5 - APPENDIX

APPENDIX A - Glossary

Definitions of technical terms used in the manual.

APPENDIX B - Macroprogram Commands

List of commands available for Macroprogram development.