20 General Information
iina70e 01.fm technical handbook(1408)
1.4.2.6 Test chamber TC1000
This test chamber turns the UL1000 / UL1000 Fab into a workstation to test
hermetically sealed components.
Testing according to MIL-STD 883 can be done easily, fast and accurate. The test
starts automatically when the chamber lid is closed, test parameters like cycle time
and rejectant level can be setted in the menu Auto Leak Test (see 6.6.1.6). The test
cycle runs automatically, the test result is also displayed by red / green LEDs directly
at the chamber.
Fig. 1-4 Test chamber TC1000
To Next Page
Loading...
