Description of the Menu 87
iina70e 06.fm technical handbook(1408)
6.8.2 Access to Trigger&Alarme menu
• Main Menu > Access Control > Access to Trigger&Alarme menu
That allows access to this function (see 6.4) even at a blocked menu access (see
6.8.4).
6.8.3 Change Device PIN
• Main Menu > Access Control > Change Device PIN
The access to the UL1000 and UL1000 Fab can be restricted by a Device-PIN. If the
Device-PIN is not 0000 the UL1000 and UL1000 Fab will ask for this PIN directly after
power on. Without device-PIN the UL1000 and UL1000 Fab foes not even switch on
the pumps.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.
6.8.4 Change Menu-PIN
• Main Menu > Access Control > Change Menu-PIN
The access to the menu can be restricted by entering or changing the personal
identification number (PIN). No PIN will be checked if 0000 is entered.
Please refer to Chapter 4.2.2.7 Numerical Entries for the description of the entry.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.
To Next Page
Loading...
