Description of the Menu 85
iina70e 06.fm technical handbook(1408)
6.7 Information
• Main Menu > Information
The Information Menu Fig. 6-22 enables submenus to select different kinds of
information belonging to the UL1000 and UL1000 Fab.
6.7.1 Service
• Main Menu > Information > Service
With the main menu special functions can be accomplished (e. g. manual switching
of the valves). The access to the service menu is protected by a PIN. This PIN is not
communicated with the delivery of the leak detector but after an adequate service
training. For more information concerning the service menu see instructions
(iipa74e1).
Fig. 6-22: The Information Menu
Softkey 2: View settings
The current settings will be displayed on 4 pages, e.g. trigger levels, test leak
mass, date and time.
Softkey 3: View internal data
Information on measured internal data is provided on 4 screens.
Softkey 4: Vacuum diagram
The vacuum diagram of the UL1000 and UL1000 Fab is shown. Here you
can see which valves are opend or closed momentarily and more.
Softkey 5: View error list
The list of occured errors and warnings will be displayed.
Softkey 6: Calibration history
The carried out calibrations will be listed.
Softkey 7: Calibration factors
The calibration factors for the different masses, the machine factor will be
displayed.
Softkey 8: Service
Please refer to Chapter 6.7.1
To Next Page
Loading...
