16 General Information
iina70e 01.fm technical handbook(1408)
1.3.2.3 Other Data
1.3.2.4 Ambient Conditions
1.4 Unpacking
Unpack the UL1000 and UL1000 Fab immediately after delivery, even if it will be
installed later on.
Examine the shipping container for any external damage. Completely remove the
packaging materials.
Check if the UL1000 and UL1000 Fab is complete (See Chapter 1.4.1) and carefully
examine the leak detector visually.
If any damage is discovered, report it immediately to the forwarding agent and
insurer. If the damaged part has to be replaced, please contact the orders
department.
Notice: Before starting up make sure that the transportation fixing is loosened.
(Please refer to chapter 2.1)
Tipp Retain the packaging materials in the event of complaints about damage.
Tipp For unpacking please use the wedge which is part of the packaging.
Valves solenoid
Dimensions (L × W × H) incl. handle in mm 1068 × 525 × 850
Dimensions (L × W × H) incl. handle in inches 42 × 21 × 33
Weight in kg 110
Weight in lbs 242
Noise level dB (A) < 70
Noise level dB (A) 0.5m distance < 56
Audio alarm dB (A) 90
Contamination level (to IEC 60664-1) 2
Overvoltage category (to IEC 60664-1) II
For use within buildings
Permissible ambient temperature (during operation) +10 °C … +40 °C
Permissible storage temperature 0 °C … +60 °C
Max. rel. humidity 80% non condensing
Max. permissible height above sea level (during operation) 2000 m
To Next Page
Loading...
