Inficon UL1000 Fab - RS232 and Remote Control Interfaces

Installation 31
iina70e 02.fm technical handbook(1408)
2.3.2.5 RS232
This RS232 C interface Fig. 2-6/5 is wired as data communication equipment (DCE)
and permits the connection of a personal computer (PC) for monitoring and data
logging. The connection is made through a 9 pin sub-D socket. For more information
refer to the Interface Description.
2.3.2.6 Remote Control
This Remote Control interface Fig. 2-6/6 is a serial interface to control the UL1000
and UL1000 Fab by the RC1000. The RC1000 Remote Control can be connected via
the wireless transmitter or via an extension cable with a RJ45 plug. Refer to the
RC1000 Technical Handbook for more information.
Pin Assignment
2RXD
3TXD
5GND
7RTS
8CTS
Pin Assignment
2 +24V (fuse 0.8 A time lag)
30V
4 RXD (intern. RS232)
5 TXD (intern. RS232)