52 Description of the Menu
iina70e 06.fm technical handbook(1408)
6 Description of the Menu
By pressing the MENU push button Fig. 6-1 the main menu will be displayed
regardless of the current working mode.
The main menu Fig. 6-1 leads the operator to several submenus described in the
following chapters.
6.1 Main Menu
The main menu shows 7 sub-menus. In these sub-menus groups of technical
features are put together logically. From here the next levels of the menu tree can be
reached.
Tipp All following chapters show the path to get to the described menu line right
underneath the headline. This path is indicated by a dot (•).
The next page gives an overview of the entire menu architecture Fig. 6-2.
Fig. 6-1: The Main Menu
Key No. Name Description
1 Back Return to the previous screen.
2 View
Display settings like scaling, contrast, system
background.
Please refer to Chapter 6.2.
3 Mode
Selection of different working modes like
Vacuum, Sniff
Please refer to Chapter 6.3.
4 Trigger & Alarms
Settings of units, trigger levels and alarms.
Please refer to Chapter 6.4.
5 Calibration
Calibration of the UL1000 and UL1000 Fab.
Please refer to Chapter 6.5.
6 Settings
Settings of internal machine parameters.
Please refer to Chapter 6.6.
7 Information
Information on the UL1000 and UL1000 Fab
(electrical and vacuum data) and servcie menu.
Please refer to Chapter 6.7.
8 Access Control
Access restrictions.
Please refer to Chapter 6.8.
To Next Page
Loading...
