Inficon UL1000 Fab - Page 53

Description of the Menu 53
iina70e 06.fm technical handbook(1408)
Fig. 6-2: Menu structure overview
1. Level 2. Level 3. Level
Main Menu
View (See 6.2)
Scale linear/logarithmic
Display-range auto/manual
Time axis
Contrast
Background in Stand-by
Decimal places
Lower display limit
Mode (See 6.3 ) Sniff/Vacuum / Auto Leak Test
Trigger & Alarms (See 6.4 )
Trigger Level 1
Trigger Level 2
Volume
Units
Alarm delay
Audio alarm type
Calibration (See 6.5 )
internal
manual
automatic
external
Edit leakrate
Start
Settings (See 6.6 )
Vacuum settings
Automatic purge (UL1000 Fab only)
Vent delay
Vacuum ranges
Leak rate internal test leak
Machine factor
Zero & Background
Background Suppression
Zero
Mass
Interfaces
Control Location
RS232 Protocol
Scaling Recorder Output
Recorder output
Miscellaneous
Time&Date
Language
Leak rate filter
Mains Frequency
Service interval exhaust filter
Service message exhaust filter
Parameter save / load
Load parameter set
Save parameter set
Monitoring functions
Calibration request
Particle protection
Contamination protection
Pressure limits for vacuum ranges
Pressure limits for sniff mode
Maximum evacuation time
Information (See 6.7)
View settings
View internal data
Vacuum diagram
View error list
Calibration history
Calibration factors
Service
Access Control (See 6.8)
Access to CAL function
Change Device PIN
Change Menu-PIN