User’s manual of CLEO Patient Monitor
- 50 -
CLEANING
To clean the CLEO Patient Monitor, dampen a cloth with a commercial, nonabrasive
cleaner and wipe the exterior surfaces lightly. Do not allow any liquids to come in contact
with the power connector or switches. Do not allow any liquids to penetrate connectors or
openings in the instrument. For cables, sensors, and cuffs, follow the cleaning instructions
in the directions for use that accompany these accessories.
PERIODIC SAFETY CHECKS
It is recommended that the following checks be performed every 24 months.
• Inspect the equipment for mechanical and functional damage.
• Inspect the safety relevant labels for legibility.
[WARNING]: Do not spray, pour, or spill liquid on CLEO, its accessories, connectors,
switches, or openings in the chassis. Do not immerse the CLEO or its accessories in
liquid or clean with caustic or abrasive cleaners.
To Next Page
Loading...
