InFocus IN2136 - User Controls; Control Panel & Remote Control; Control Panel

24
English
User Controls
Control Panel
Using the Control Panel
Power
Refer to the “Powering the Projector On / Off”
section on pages 14-15.
Source Select the input source.
Menu
Launch the on-screen display (OSD) menu.
Press again to exit OSD menu.
Help
Help Menu (only available when OSD menu
is not shown).
Re-Sync
Automatically synchronize the projector to the
input source.
Enter Conrm your item selection.
Four Directional Select
Keys
Use to select items or make
adjustments to your selection.
Keystone /
Use to adjust image distortion caused
by tilting the projector.

±20 degrees: IN134ST/IN136ST/
IN138HDST model.

±40 degrees: IN134/IN136/IN138HD/
SP2080HD/IN2134/IN2136/IN2138HD
model.
Lamp LED Indicates the projector’s lamp status.
Temp LED Indicates the projector’s temperature status.
On/Standby LED Indicates the projector’s status.
Control Panel & Remote Control