InFocus IN2136 User Manual

41
English
User Controls
3D Mode

Off: Select “Off” to turn 3D settings off for 3D images.

DLP Link: Select “DLP Link” to use optimized settings for DLP
Link 3D images.

IR: Select “IR” to use optimized setting for IR 3D Glasses.
3D -> 2D

3D: Display 3D signal.

L (Left): Display the left frame of 3D content.

R (Right): Display the right frame of 3D content.
3D Format

Auto: When a 3D identication signal is detected, the 3D format
is selected automatically.

SBS: Use this mode for “Side-by-side” format 3D content.

Top and Bottom: Use this mode for “Top and Bottom” format 3D
content.

Frame Sequential: Use this mode for “Frame Sequential”
format 3D content.
3D Sync. Invert

Press “On” to invert left and right frame contents.

Press “Off” for default frame contents.
Compatible 3D
source, 3D content
and active shutter
glasses are required
for 3D viewing.
"3D Sync Invert" is
only available for
DLP Link glasses.
IR sync is only
available on 1080p
models.
See page 72
for supported 3D
formats.
DISPLAY | 3D

InFocus IN2136 Specifications

General

Brand	InFocus
Model	IN2136
Category	Projector
Language	English