30
English
User Controls
The Projector has multilingual On-screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1. To open the OSD menu, press “Menu” on the remote control or
the control panel.
2 When the OSD is displayed, use
keys to select any item in
the main menu. While making a selection on a particular page,
press
or key to enter sub menu.
3. Use
keys to select the desired item and adjust the settings
using
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Enter” to conrm, and the screen will return to the previous
menu.
6. To exit, press “Menu” again. The OSD menu will return to the
previous menu and the projector will automatically save the new
settings.
On-screen Display Menus
Main Menu
Sub Menu
Settings
To Next Page
Loading...
Need help?
General
