25
English
User Controls
Remote Control Battery Installation
1. Push the clip to release the battery cover.
2. Install new batteries (AAA/R03). Ensure that you have the
batteries’ polarity (+/–) aligned correctly.
3. Close the battery cover and press it down until it clicks into
place. Do not mix different types of batteries or new and old
batteries.
To ensure safe operation, please observe the following
precautions :
` Use AAA/R03 type batteries.
` Avoid contact with water or liquid.
` Do not expose the remote control to moisture or heat.
` Do not drop the remote control.
` If the batteries have leaked in the remote control, carefully
wipe the case clean and install new batteries.
` There is a risk of explosion if the batteries are replaced with
the wrong type.
` Dispose of used batteries according to the instructions.
` Remove the batteries from the remote control when not using
for extended periods.
` The remote control may fail to operate if the infrared remote
sensor is exposed to bright sunlight or uorescent lighting.
To Next Page
Loading...
Need help?
General
