33
English
User Controls
Main Menu Sub Menu Settings
OPTIONS Advanced Sleep Timer
(min)
0~990
Quick Resume On/Off
Power Mode
(Standby)
Active/Eco.
Network
(Standby)
*11
On/Off
VGA Out
(Standby)
*11
On/Off
Exit
Lamp
Settings
Lamp Hours
Lamp
Reminder
On/Off
Brightness
Mode
Bright/Eco/Dynamic
Lamp Reset Yes/No
Exit
Optional Filter
Settings
Optional Filter
Installed
Yes/No
Filter Usage
Hours
0~99999
Filter Reminder Off/300Hr/500Hr/800Hr/1000Hr
Filter Reset Yes/No
Exit
Reset Yes/No
Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.
*1
Supported only for Video sources.
*2
Supported only for HDMI sources.
*3
Supported only for Analog VGA sources.
*4
16:10 for WXGA models only, LBX for WXGA/1080p models only.
*5
Supported only for ST models.
*6
IR sync supported on 1080p models only.
*7
Only available when 3D is enabled.
*8
Supported on WXGA models only.
*9
Supported only for models with RJ-45.
*10
Screen trigger supported on 1080p models only.
*11
Supported only on projectors equipped with network function and only
when Power Mode (Standby) is Active.