4
English
Usage Notice
Do:
Turn off and unplug the power plug from the AC outlet before
cleaning the product.
Use a soft dry cloth with mild detergent to clean the display
housing.
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Use room blinds to reduce ambient light in order to minimize
lamp power.
Do not:
Block the projector inlet or outlet air vents.
RG2
USB-A cable
(extension cable for
USB peripheral device)
Micro USB cable
(provides 5V power for dongle)
Short-throw lens models
RG2
USB-A cable
(extension cable for
USB peripheral device)
Micro USB cable
(provides 5V power for dongle)
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- In extremely hot, cold or humid environments.
Ensure that the ambient room temperature is within
5 - 40°C.
Relative Humidity is 5 - 40°C, 80% (Max.), non-condensing.
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic eld.
- In direct sunlight.
To Next Page
Loading...
Need help?
General
