55
English
Appendices
How to use web browser to control your projector via a
router
1. Turn “On” the DHCP option on projector to allow a DHCP
server to automatically assign an IP Address.
2. Open a web browser on your PC and enter the
projector’s IP address in the URL window. The projector’s
conguration web interface opens.
3. Enter the user name and password (default user name =
admin, default password = admin) and click Login.
USB-A
VGA IN
VGA OUT
RS232
VIDEO
AUDIO OUT
AUDIO IN
HDMI 2
HDMI 1
SCREEN
TRIGGER
RJ-45
3D SYNC
Making a direct connection from your computer to the
projector
1. Turn “Off” the DHCP option on the projector.
2. Congure the IP address, Subnet Mask, Gateway, and
DNS on the projector (“Network”).
3. Open the Network and Sharing Center on your PC and
assign an IP on the same subnet as the projector (rst
three numbers identical, fourth number different). Assign
identical Subnet mask and gateway numbers. Click OK to
save these parameters.
The steps in this
section are based on
Windows 7 operating
system.
To Next Page
Loading...
Need help?
General
