66
English
Appendices
On Screen Messages
Temperature warning:
Fan failed:
Lamp warning:
Out of display range:
If the remote control does not work
Verify that the angle of the remote to the IR receiver is within ±20
degrees.
Make sure there are not any obstructions between the remote
control and the projector. Move to within 7m of the projector.
Make sure the batteries are inserted correctly.
Replace batteries if they are exhausted.
Turn off any uorescent lights that are illuminating the IR receiver.
Make sure that IR Function is turned On in the Options menu.
To Next Page
Loading...
Need help?
General
