INIM Electronics SmartLoop Installation Manual

Installation Manual
28 Technical specifications
Motherboard
Loop Output Terminals Max 0.5 A each Loop
NAC1, NAC2, NAC3, Alarm NAC, Fault Output 1.3 A MAX
Fault relay, Alarm relay dry contact 5A @ 30V max
RS485 BUS 1.8 A MAX
AUX, AUX-R 1.8 A MAX
CURRENT RIPPLE on AUX and AUX-R outputs 1% MAX
PL Normally Open Contact 5A @ 30Vdc MAX
SmartLoop/Input/Output
on each CH 0.9 A MAX

INIM Electronics SmartLoop Specifications

General

Brand	INIM Electronics
Model	SmartLoop
Category	Control Panel
Language	English